View SL5511_1310084.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
SL5500 SL5501
PACKAGE
SL5504
SCHEMATIC
SL5511
ANODE 1
6 BASE
6 1
6
CATHODE 2 5 COL
1
3 4 EMITTER
6 1
DESCRIPTION
The SL5500, SL5501, SL5504 and SL5511 are optically coupled isolators each consisting of an infrared emitting GaAs diode and a silicon NPN phototransistor with accessible base. These devices are housed in 6-pin dual-in-line packages (DIP).
FEATURES
* * * * * High output/input DC current transfer ratio Low saturation voltage High isolation voltage of 5.3 kV RMS UL recognized (File # E90700) VDE recognized (File # 94766) - Ordering option `300' (e.g. SL5500.300)
APPLICATIONS
* * * * * Power supply regulators Digital logic inputs Microprocessor inputs Appliance sensor systems Industrial controls
(c) 2003 Fairchild Semiconductor Corporation
Page 1 of 10
6/30/03
6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
SL5500 SL5501
Parameters TOTAL DEVICE Storage Temperature Operating Temperature Lead Solder Temperature Total Power Dissipation at TA = 25C Ambient Derate Linearly from 25C EMITTER Continuous Reverse Voltage Continuous Forward Current Forward Current - Peak (10 s pulse, = 0.01) Total Power Dissipation TA = 25C Ambient Derate Linearly from 25C DETECTOR Collector to Emitter Voltage (open base) Collector to Base Voltage (open emitter) Emitter to Collector Voltage (open base) Emitter to Base Voltage (open colletor) DC Collector Current Detector Power Dissipation @ TA = 25C Ambient Derate Linearly from 25C SL5500, SL5501, SL5511 SL5504 SL5500, SL5501, SL5511 SL5504 VCEO VCBO VECO VEBO IC PD 30 80 70 120 7 7 100 150 2.0 V V V V mA mW mW/C VR IF IF(pk) PD 3 100 3.0 150 2.0 V mA A mW mW/C TSTG TOPR TSOL PD -55 to +150 -55 to +100 260 for 10 sec 260 3.3 C C C mW mW/C
SL5504
Symbol Value
SL5511
Units
(c) 2003 Fairchild Semiconductor Corporation
Page 2 of 10
6/30/03
6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
SL5500 SL5501 SL5504 SL5511
ELECTRICAL CHARACTERISTICS (TA = 25C Unless otherwise specified.) INDIVIDUAL COMPONENT CHARACTERISTICS
Parameters EMITTER Input Forward Voltage Reverse Current DETECTOR Leakage Current Collector to Emitter Breakdown Voltage Collector to Emitter Collector to Base Emitter to Collector Emitter to Base IC = 10 A, IF = 0 IC = 10 A, IF = 0 IE = 10 A, IF = 0 IE = 10 A, IF = 0 BVCEO BVCBO BVECO BVEBO SL5500, SL5501, SL5511 SL5504 SL5500, SL5501, SL5511 SL5504 All All 30 80 30 120 7 7 100 110 120 150 10 10 V V V V IF = 20 mA, TA = 25 to 70C IF = 2 mA VR = 3 V, TA = 25 to 70C VCE = 10 V VCE = 30 V VCE = 10 V, TA = 70C VCB = 30 V ICBO ICEO All VF IR All All 1.23 1.10 0.001 1 0.005 0.001 1.3 1.2 10 50 10 500 50 V V A nA A nA A Test Conditions Symbol Device Min Typ* Max Units
ISOLATION CHARACTERISTICS
Characteristic Input-Output Isolation Voltage (note 1) Isolation Resistance Isolation Capacitance *Typical values at TA = 25C Test Conditions f = 60Hz, T = 1 min. VI-O = 500 VDC f = 1 MHz, V = 0V Symbol VISO RISO CISO Min 5300 1 10 0.6 1.3 Typ* Max Units VAC(RMS) T pF
(c) 2003 Fairchild Semiconductor Corporation
Page 3 of 10
6/30/03
6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
SL5500 SL5501 SL5504 SL5511
TRANSFER CHARACTERISTICS (TA = 25C Unless otherwise specified.)
DC Characteristics Test Conditions IF = 10 mA, VCE = 0.4 V IF = 10 mA, VCE = 0.4 V, TA = 70C IF = 10 mA, VCE = 0.4 V, TA = 25C to 70C IF = 2 mA, VCE = 5 V Output/Input Current Transfer Ratio IF = 2 mA, VCE = 5 V, TA = 70C IF = 2 mA, VCE = 5 V, TA = 25C to 70C IF = 2 mA, VCE = 5 V, TA = 25C to 70C IF = 0.5 mA, VCE = 0.4 V, TA = 25C to 70C Collector-Emitter Saturation Voltage AC Characteristics Saturated Switching Times Turn-On Time RL = 1 k, IF = 16 mA, VCC = 5 V ton SL5500, SL5501, SL5511 SL5504 Turn-Off Time See Fig. 1 and Fig. 2 toff SL5500, SL5501, SL5511 SL5504 Note 1. Device considered a two-terminal device: pins 1, 2 and 3 shorted together and pins 4, 5 and 6 shorted together. 20 50 50 150 s s IF = 50 mA, IC = 10 mA IF = 20 mA, IC = 2 mA Test Conditions VCE(SAT) Symbol CTR Symbol Device SL5500 SL5500 SL5501, SL5504 SL5500 SL5500 SL5501, SL5504 SL5511 SL5511 SL5500 SL5501, SL5504, SL5511 Device Min Typ Min 50 40 25 40 30 15 25 20 0.4 0.4 Max V Units % Typ Max 300 300 400 Units
(c) 2003 Fairchild Semiconductor Corporation
Page 4 of 10
6/30/03
6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
SL5500 SL5501 SL5504
VI
SL5511
VI
+VCC
0 VO 90%
VO 50 RL
0 ton toff
10%
Fig. 1 Switching Circuit Fig. 2 Waveforms
Fig. 3 LED Forward Voltage vs. Forward Current
1.8 1.4
Fig. 4 Normalized CTR vs. Forward Current
VCE = 5.0V TA = 25C 1.2 Normalized to I F = 10mA
1.7
1.6
VF - FORWARD VOLTAGE (V)
1.0
NORMALIZED CTR
1.5
0.8
1.4 TA = - 55C 1.3 TA = 25C 1.2 TA = 100C 1.1
0.6
0.4
0.2
1.0 1 10 I F - LED FORWARD CURRENT (mA) 100
0.0 0 5 10 15 20
FORWARD CURRENT - I F (mA)
Fig. 5 Normalized CTR vs. Ambient Temperature
1.6 1.0 1.4 IF = 5mA 0.8 1.2 IF = 10mA 1.0 IF = 20mA 0.9
Fig. 7 CTR vs. RBE (Unsaturated)
NORMALIZED CTR
NORMALIZED CTR
0.7 0.6 0.5 0.4 0.3
IF = 10mA
0.8 IF = 20mA 0.6 Normalized to IF = 10 mA TA = 25C -50 -25 0 25 50 75 100 125
IF = 5mA
0.2 0.1 0.0 10 R BE - BASE RESISTANCE (k) 1000 VCE = 5V, TA = 25C Normalized to CTR at RBE = Open
0.4 -75
AMBIENT TEMPERATURE - TA (oC)
(c) 2003 Fairchild Semiconductor Corporation
Page 5 of 10
6/30/03
6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
SL5500 SL5501
Fig. 7 CTR vs. RBE (Saturated)
1.0 0.9 0.8 I F = 20mA
NORMALIZED toff
SL5504
Fig. 8 Normalized toff vs. RBE
1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 VCC = 10V I C = 2mA R L = 100 NORMALIZED TO: t off AT RBE = OPEN
SL5511
NORMALIZED CTR
0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 10
I F = 10mA
I F = 5mA
VCE = 0.3V, TA = 25C Normalized to CTR at RBE = Open 100 RBE - BASE RESISTANCE (k ) 1000
0.2 0.1 10 100 1000 10000
RBE - BASE RESISTANCE (k )
Fig. 9 Normalized ton vs. RBE
6.0 5.5 5.0 4.5 100 1000
Fig. 10 Switching Speed vs. Load Resistor
IF = 10mA VCC = 10V TA = 25C
NORMALIZED t on
4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 10 100 1000 10000 R BE - BASE RESISTANCE (k ) VCC = 10V I C = 2mA R L = 100 NORMALIZED TO t on AT RBE = OPEN
SWITCHING SPEED - (s)
Toff Tf 10
Ton 1 Tr
Fig. 11 Collector Emitter Saturation Voltage vs. Collector Current
100
0.1 0.1
1
10
100
R-LOAD RESISTOR (k )
Fig. 12 Dark Current vs. Ambient Temperature
10000 10
I CEO - COLLECTOR -EMITTER DARK CURRENT (nA)
1000
VCE = 10V TA = 25 oC
1
100
VCEsat - (V)
I F = 2.5mA 0.1
10
0.01
I = 20mA I F = 10mA F I F = 5mA T =25 C A
o
0.1
0.01
0.001 0.01
0.001 0.1 I C - (mA) 1 10 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (C)
(c) 2003 Fairchild Semiconductor Corporation
Page 6 of 10
6/30/03
6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
SL5500 SL5501 SL5504 SL5511
Package Dimensions (Through Hole)
PIN 1 ID.
Package Dimensions (Surface Mount)
0.350 (8.89) 0.330 (8.38)
3
2
1
0.270 (6.86) 0.240 (6.10)
PIN 1 ID.
0.270 (6.86) 0.240 (6.10)
SEATING PLANE
0.350 (8.89) 0.330 (8.38) 0.070 (1.78) 0.045 (1.14)
4
5
6
0.070 (1.78) 0.045 (1.14)
0.300 (7.62) TYP
0.200 (5.08) 0.115 (2.92)
0.200 (5.08) 0.165 (4.18) 0.020 (0.51) MIN 0.100 (2.54) TYP
0.016 (0.41) 0.008 (0.20)
0.154 (3.90) 0.100 (2.54)
0.020 (0.51) MIN 0.016 (0.40) 0.008 (0.20)
0.022 (0.56) 0.016 (0.41)
0.016 (0.40) MIN 0.315 (8.00) MIN 0.405 (10.30) MAX
0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP
0 to 15
0.300 (7.62) TYP
Lead Coplanarity : 0.004 (0.10) MAX
Package Dimensions (0.4" Lead Spacing)
Recommended Pad Layout for Surface Mount Leadform
0.270 (6.86) 0.240 (6.10)
0.070 (1.78)
0.060 (1.52)
0.350 (8.89) 0.330 (8.38) 0.070 (1.78) 0.045 (1.14)
0.415 (10.54)
0.100 (2.54) 0.295 (7.49) 0.030 (0.76)
SEATING PLANE
0.200 (5.08) 0.135 (3.43)
0.154 (3.90) 0.100 (2.54)
0.004 (0.10) MIN
0.016 (0.40) 0.008 (0.20)
0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP
0 to 15 0.400 (10.16) TYP
Note All dimensions are in inches (millimeters)
(c) 2003 Fairchild Semiconductor Corporation
Page 7 of 10
6/30/03
6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
SL5500 SL5501 SL5504 SL5511
ORDERING INFORMATION
Option S SD W 300 300W 3S 3SD Order Entry Identifier .S .SD .W .300 .300W .3S .3SD Description Surface Mount Lead Bend Surface Mount; Tape and Reel 0.4" Lead Spacing VDE 0884 VDE 0884, 0.4" Lead Spacing VDE 0884, Surface Mount VDE 0884, Surface Mount, Tape and Reel
MARKING INFORMATION
1
SL5500 V XX YY K
3 4 5
2 6
Definitions
1 2 3 4 5 6 Fairchild logo Device number VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) Two digit year code, e.g., `03' Two digit work week ranging from `01' to `53' Assembly package code
(c) 2003 Fairchild Semiconductor Corporation
Page 8 of 10
6/30/03
6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
SL5500 SL5501 SL5504 SL5511
Carrier Tape Specifications ("D" Taping Orientation)
12.0 0.1 4.85 0.20 0.30 0.05 4.0 0.1 4.0 0.1 O1.55 0.05 1.75 0.10
7.5 0.1 13.2 0.2 9.55 0.20 16.0 0.3
0.1 MAX
10.30 0.20
O1.6 0.1
User Direction of Feed
NOTE All dimensions are in inches (millimeters) Reflow Profile (Black Package, No Suffix)
300 Temperature (C) 250 200 150 100 50 0 0 0.5 1 1.5 2 2.5 3 225 C peak
215C, 10-30 s
Time above 183C, 60-150 sec
Ramp up = 3C/sec 3.5 4 4.5
* Peak reflow temperature: 225C (package surface temperature) * Time of temperature higher than 183C for 60-150 seconds * One time soldering reflow is recommended
Time (Minute)
(c) 2003 Fairchild Semiconductor Corporation
Page 9 of 10
6/30/03
6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
SL5500 SL5501 SL5504 SL5511
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
(c) 2003 Fairchild Semiconductor Corporation
Page 10 of 10
6/30/03

▲Up To Search▲

Price & Availability of SL5511

	To Download SL5511 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .